Your Backyard Haven > Pools & Spas > What are the Different Types of Pool Sizes?
What are the Different Types of Pool Sizes?
  • Toronto Pools
  • Pools & Spas
  • No Comments
Rate this post

It’s important to consider the dimensions of your future pool when making your idea a reality. While making this determination, the available space is more important than your preferences or money. It’s a frequent misconception that putting in a swimming pool necessitates a sizable backyard. Nonetheless, there is a wide variety of pool sizes to choose from. This is why the pool sizes at Your Backyard Haven can be adjusted to fit your needs.

What are the Different Types of Pool Sizes?

Here are some of the different pool sizes to consider for your backyard.

In-ground pool sizes

The durability and cleanliness of an inground pool are two of its most prized qualities. The average size of an in-ground pool can vary widely depending on its construction material.

It’s common for consumers to contemplate a vinyl pool in one of three standard sizes: 16 by 32 ft., 18 by 36 ft., or 20 by 40 ft. The shape most frequently seen is a rectangle measuring 16 by 32 ft.

Kidney-shaped pools are a common design for pools made of concrete. The standard for these pools is a width and depth of 16 and 32 feet, respectively.

Fiberglass pools, which tend to be more freeform in shape, are the last type to consider. The standard dimensions for such pools are about 12 by 24 ft.

Sizes of a lap pool

As its name implies, a lap pool is ideal for comfortable swimming laps. It’s not as spacious as a round family pool, so don’t expect to do much “swimming around” in it. Because of this, lap pools are often rectangular.

The ordinary home needs more room for a lap pool of the size found at a professional facility. The typical length of a professional lap pool is 25 meters. Yet, pools that are 40 feet in length are also termed lap pools outside of the gym.

Size of a standard pool

There are many factors to consider when deciding on a pool’s standard size. The installation method, the pool’s material, and its shape are all factors to consider.

The width and length of a pool are the most common measures used to describe its size. The ratio of 2 to 1 is based on the typical backyard size where the builder will install the pool. Given these considerations, the most common pool sizes are 16 by 32 ft., 15 by 36 ft., and 20 by 40 ft.

L-shaped pool dimensions

These pools are precisely what they describe. Named for their resemblance to the letter “L,” their shape is immediately apparent. The pool forms a right angle, to put it another way.

Instead of a gradual decline, this design makes it easy to distinguish between the pool’s shallowest and deepest points. This pool’s dimensions aren’t as straightforward as the standard two-dimensional measurements.

Above-ground pool sizes

Because they don’t need to be dug into the earth, above-ground pools are simpler to set up. The same applies if you ever decide to get rid of the pool once it’s been installed.

There are normally 3 standard sizes available for above-ground pools. They range in size from 21 feet by 52 feet, with the lowest being a round pool.

These pools normally come in one of three standard sizes. This includes the smallest side relative to the average, a round, above-ground pool with 21 x 52-foot dimensions.

An oval with dimensions of 15 feet in length, 30 feet in width, and 52 inches in depth is another frequent shape for a large above-ground pool. But the most common shape is a circle, which is 24 feet in diameter and 52 feet in length.

Plunge pool sizes

While depth is necessary for a plunge pool, other specifications are less strict. Their function typically serves as a more useful standard for identification.

You can use these pools at the end of a water slide or, more commonly, after a hot tub or sauna session. Either way, they need to be deep enough to permit full-body immersion.

Plunge pools typically measure between 7 and 12 feet in length. The typical depth range for a plunge pool is between 54 and 60 inches.

What are the Different Types of Pool Sizes?

Small pool dimensions

It’s natural to be curious about the dimensions of a “small” pool if you’re thinking about getting one but have limited space.

A small pool is typically defined as 600 square feet or less. This gives you some leeway in deciding what pool to install there.

Conclusion

It may be more complex than you thought to find the ideal size and design of pool for your family. Many factors will need consideration, which can be daunting at first. Your Backyard Haven pool professionals can help you with this. They can assist you in determining the optimal pool size after discussing your needs and exploring the many available pool sizes. Contact us today!

Author: Toronto Pools

Leave a Reply